FITTED EQUIPMENT
108
Windows
To open all window types push the central
button with your thumbs and turn the internal
handles through 90 degrees and push open
the window.
On models fitted with ratchet stays:
the window locks in the open position to
pre-set positions located within the stay.
To operate, push open the window until you
hear an audible click and then slowly release
the pane and the window will be locked in the
first open position. Push open again to find
the next locking position. To close, fully open
the window which will disengage the locks
and allow the window to close slowly and lock
off the handles by turning back through 90
degrees.
Windows / Roller Blind Advice
In case of prolonged exposure to the sun roller
blinds should not be completely closed as this
could cause excessive heat concentration at
the top of the window, due to characteristics
of the glazing material the windows could be
adversely affected.
Roller blinds that shade from the bottom
upwards it is necessary to leave a gap of a few
centimetres open at the top, this way the heat
between window and blind can escape. A fly
screen does not cause an obstruction.
Roller blinds that shade from the top
downwards must be kept completely open,
or be opened regularly to allow the heat to
escape.
Keeping the windows in ventilation position
allows heat to escape.
Never fully close a roller blind system when
storing the vehicle or when not in use for
longer periods!
Roof lights
When opening the roof lights, care must be
taken to release the locking mechanism as the
unit is raised.
Roof lights must be fully closed when towing.
Roof lights provide varying levels of fixed
ventilation.
Therefore for optimal window life it is
recommended:-
• Blinds starting at the bottom of the window a
gap should be provided for ventilation at the
top with the window in its ventilation position.
• For vehicles containing blinds from the top
downwards or with other types of reflective
blinds / curtains, please make sure that
these blinds are also ventilated or not fully
closed.
Ensure that all windows and roof vents are
closed when the vehicle travels on the road.
MPK Rooflight (when fitted)
!
WARNING:
Never stand on the dome of the rooflight!
Instruction for use
The rooflight can be opened fully, or in four
different directions, so that the dome can be
angled against driving weather conditions.
The handle profiles of both roller blinds (flynet
and roller blind) click into space at the edge of
the frame and can be opened by pulling the
handle (arrow on the handle profile).
With both handle profiles clipped together they
can be moved to any position. To separate,
fully open the flynet and squeeze together the
catches on the central lock and allow flynet to
recoil.
Free-air-flow
!
WARNING:
When closed there is a free
airflow throughout the rooflight, which must
be kept free at all times.
WINDOWS / ROOFLIGHT
Summary of Contents for Basecamp 2018
