©2022 SwellPro All Rights Reserved
54
Orbit combines orbit mode with Tap to Fly. Pilots can set a point on the map and its
radius. The drone will fly to the point and start orbiting. The orbit radius, speed, laps
can be set on the App.
5.
Delete:
Tap to delete the set point on the map.
6.
Map Layer:
Pilots can choose from 3 different map layers: Standard, Satellite, Dark.
7.
Remote Controller Location:
Tap to quickly identify the location of the remote
controller on the map.
8.
Drone Location:
Tap to quickly locate the position of the drone on the map.
9.
Thumbnail Screen:
Tap to switch between camera and map views.
10.
Tap to return:
Tap to start auto return to home (RTH).
11.
Execute:
Tap to excute mission planning (Tap to Flight, Waypoints, Mapping).
12.
Save:
Save the points set on the map for latter use (recurring tasks).
13.
Route Saved:
Access and perform the saved points.
Set the Wi-Fi Password
Set the Wi-Fi Password
To set the Wi-Fi password:
1. Connect the SDFly to the remote controller.
2. Login to the device.
3. Go to flight settings, showing as 3 dots on the top right of the interface.
4. Scroll to advanced settings and select "Set Wi-Fi Password".
5. Type the password you want and press "SAVE PASSWORD".
6. Re-connect the Wi-Fi.
Reset the Wi-Fi Password
To reset the Wi-Fi password:
1. Power on the remote controller.
2. Wait for 40 seconds for the MultiSync video transmission system to boot up.
