©2022 SwellPro All Rights Reserved
50
SDFly App
SDFly is the whole new flight App designed by SwellPro. It marks the new era for
SwellPro. SDFly allows SwellPro pilots to do live HD viewing; adjust aircraft and camera
setting; proceed with mission planning (include waypoints and mapping); easily browse,
download, and share aerial footage. This App currently only supports the SplashDrone 4.
It works both on iOS and Android.
Download SDFly
SDFly can be downloaded on App Store or Google Play. To download the intall package,
go to
and search for “SDFly App”.
Connect SDFly
After successfully installing the App, turn on the remote controller and then the drone.
Connect your mobile device to the remote controller's Wi-Fi hotspot named
SWP_B
xxxxx. The default password is "12345678".
After connecting the Wi-Fi, open the SDFly App. You can now log in to the drone.
SplashDrone 4 remote controller allows for up to 4 mobile devices to connect
simultaneously. Multiple people can operate the drone together. All the connected
devices can control the aircraft, but only the first connected device is able to show the
image transmission.
⚠
The Wi-Fi connection only supports 5G Wi-Fi (Wi-Fi 5 or Wi-Fi 6). Please use the
mobile device that supports 5G Wi-Fi in order to connect to the remote controller's
hotspot.
Use Mobile Data
Connecting the mobile device to the remote controller's Wi-Fi can cause the internet
connection to be interrupted.
For iPhone/iPad Users
Proceed to the following steps to use the mobile data while connecting to the remote
controller's Wi-Fi:
1.
Go to the device's Wi-Fi setting. Look for the remote controller's Wi-Fi
(
SWP_
xxxxxx). Tap in the setting for the Wi-Fi.
2.
Under IPV4 address, set "Configure IP" from automatic to manual mode.
3.
Configure the manual IP: IP address to "192.168.2.110"; Subnet Mask to
"255.255.255.0".
4.
Your iOS device is now able to use mobile data while connecting the remote
controller's Wi-Fi.
