©2022 SwellPro All Rights Reserved
34
If the pairing process does not succeed, please try to pair it again from step 1.
Remote Controller Rear Ports
①
SDK Serial Port:
access to flight control
data and transparent transmission.
②
Charging Port:
remote controller charging
port.
③
Pairing Button:
used for aircraft and
remote controller pairing.
④
Micro USB:
use for remote controller
firmware upgrade.
⑤
Ethernet
Port:
This
supports
the
development of computer ground station
software to control the aircraft and its
airborne equipment.
⚠️
Ensure to tightly seal the rear rubber sealing before use to prevent water getting in
to the remote controller.
