38 ©2021 SwellPro Technology Co., Limited
To enter mode, simply press the
buttons.
Press the left button to engage
YAW. The left joystick will now only control the
ascend/descend of the drone.
Press the right button to engage
ROLL. The right joystick will now only control the pitch
of the drone.
Dynamic Return to Home (RTH)
The SplashDrone 4 constantly senses the GPS location of the remote controller,
allowing the aircraft to always return to the pilot even if they have moved from the
original take-off point.
•
If no GPS location is established by the remote controller, the drone would return to
the take-off point.
•
If the remote controller lost the GPS signal during the RTH process, the drone would
return to the last known GPS location of the remote controller.
After the return function is activated either manually or automatically, the aircraft will fly
to the current home point and land. If the home position is obtained from the remote
controller, the aircraft will land 3 meters in front of the remote controller for the
pilot’s
safety.
To start Return-to-Home:
•
Long press the Return Home button, the remote controller will beep and vibrate
twice to indicate that the drone starts the RTH process. The flight mode indicator on
the remote controller status bar will change to the
letter “R” to indicate the drone is
in the RTH process.
•
Return-to-Home can also be initiated on the app.
•
The RTH height can be set on the app.
Return Home Process
If the drone’s height > 20m and the distance from Home
Point > 15m, the drone will maintain its altitude and return
to its home point before landing.
If the drone’s height < 20m and distance from Home
Point > 15m, the drone will ascend to 20m and then return
to its Home Point before landing.
