8 ©2021 SwellPro
Gimbal camera calibration is performed together with the aircraft gyroscope
calibration. To calibrate the gimbal camera, you just need to proceed with aircraft
gyroscope calibration.
To calibrate the gimbal camera:
1. Place the drone on a level surface, power on the remote
controller, then the drone. Wait for the aircraft to connect to the
remote controller.
2. Hold the left joystick down to its lowest position, then quickly
move the right joystick left to right, back and forth, until the front
and rear status indicators flash alternately, or the remote
controller screen prompts "WARNING aircraft Initializing,
Please Wait". The drone will now perform gyroscope
calibration. Now release the joysticks. This process will be
completed in 20 seconds. Do not move the drone during this
process.
3. When the front status indicators fast-flashing red and the rear
status indicators turn solid green, or "WARNING Aircraft
Initializing, Please Wait" prompt disappears, power off and
restart the drone. Gyroscope calibration is complete.
1) Do not calibrate the gimbal camera on a boat or other moving platforms.
APP Interface
To get into APP’s camera interface: Power
on the remote controller, then the aircraft.
Connect the phone to the remote control
ler’s
Wi-Fi hotspot. Then click "Login device".
