20
TOTAL RUNTIME:
Displays the total accumulated ON uptime of the machine. Uptime = machine heated up.
Non-user resettable.
AIR FILTER TIME:
Displays the total accumulated time air filter has been used since it was replaced. User
resettable, see chapter 8.3 Service messages & reset of component lifetime
AIR PUMP TIME:
Displays the total accumulated time the air pump has been active since it was changed.
User resettable, see chapter 8.3 Service messages & reset of component lifetime
FLUID PUMP TIME:
Displays the total accumulated time fluid pump has been active since it was changed. User
resettable, see chapter 8.3 Service messages & reset of component lifetime
FLUID FLOW TICKS:
Displays current fluid flow sensor ticks detected. Tick count is reset and starts from zero
every time the menu is accessed. This function helps check the function of the fluid flow
sensor, and is suitable if external containers are used, to confirm functionality.
RESTORE DEFAULT SETTINGS:
This function restores all user settings to factory default. Suitable if you become lost and
want to clean all settings and start over from scratch.
We recommend using this function, especially for rental companies when a machine is
returned by a customer, use this function to delete all user settings, and clean settings
for the next customer.
Default factory settings in short:
•
Operation mode is DMX, start address 001.
•
3-channel operation = shutdown over DMX enabled.
•
Screensaver enabled.
•
Power LED & bag LED enabled.
•
All manual data & output settings & timer settings erased.
NOTE: The restore default settings function will NOT reset machine data such as fluid filter
lifetime, component run time, etc.
Reset of component service time can only be done when replaced.
6.5 Fluids:
Swefog K1 is developed and designed to work with Swefog K1 molecular fluids. No other
fluid is compatible with this machine!
If the original fluid is used and regular maintenance is performed, the machine will work
well for many years.
The use of any other fluid will void warranty and may make the machine instable and/or
hazardous. Other fluids may be of good quality but are not developed especially for K1. This
means a foreign liquid will vaporize, expand and behave different than original fluid, which
may lead to spitting , non-vaporized fog and/or clogged heat exchanger.
The machine safety is not guaranteed if non-original fluids are used.
Bear in mind, foreign fluids will never give you the same performance and quality as the
original product, the fluid your machine was designed to be used with.
Summary of Contents for K1 HAZER
Page 1: ...K1 HAZER 40510 230 K1 Hazer EU version Rev 1 2019 10 03...
Page 28: ......
