6
3. SAFETY PRECAUTIONS:
•
Haze residues and fluid spillage may be dangerous. A slippery surface can cause serious personal
injury! ALWAYS check surfaces before, during and after the use of the machine.
•
Use Swefog Ultimate C- or C-XL fluid only. Other fluids may damage the machine, cause
residues inside and outside the machine, or cause toxic or odorous haze.
•
NOTE: The fluid is made with mineral-based oil and may cause allergic reactions. Make sure
that those subjected to haze and fluid are not allergic to the substance. The original Swefog fluid
is made with medical grade chemicals only, and is non-toxic. But always ensure the haze will not
cause inconvenience.
•
Connect to mains outlet with earth. Use a cable with earth. Check for correct voltage and/or
mains frequency (see machine label). NEVER use the machine with wrong mains voltage or
frequency.
•
NOTE: The condensation of the haze makes floors, stairs and other surfaces slippery. Do NOT
direct the machine’s haze output beam towards cool or hard surfaces like wood, plastics, glass or
metal. If the machine is frequently used, or used for a long time, often check that no surface is
slippery.
•
NEVER mix or dilute the fluid.
•
NEVER heat the fluid. Use room-temperature fluid only.
•
The machine is for indoor-use only. NEVER use in dusty environments. Keep away from moisture!
•
Operate in room temperatures only. Min. operating temperature is +10
°
C, max. temperature is +30
°
C.
•
NEVER cover vents or air inlets on the machine housing.
•
NEVER use dimmers for control of power to the machine. The output of the machine or compressor
capacity / speed is NOT able to regulate with mains voltage. If mains voltage is regulated (”dimmed”),
the compressor and other electric components will be damaged.
•
Service internal parts ONLY if you have the know-how and experience to perform the service
correctly. If not, please contact a Swefog service center or the manufacturer. NOTE: Incorrect service
works and/or the use of non-original spare parts will void the warranty.
•
NEVER change parts or details inside, use original spare parts only!
•
Do not overfill the machine. NEVER switch power on if fluid level is above the ”max” symbol.
•
NOTE: If there is – for any reason – a fluid leakage or spillage, wipe off fluid spillage. DO NOT use
the machine until it is mended.
•
NOTE: The haze may cause residues on mirrors, lenses and similar components if there is too much
WARNING
!
CAUTION !