6
The original Swefog fluid is made with medical grade chemicals only, and is non-
toxic. But always ensure the haze will not cause inconvenience.
•
Connect to mains outlet with earth. Use a cable with earth. Check for correct voltage
and/or mains frequency (see machine label). NEVER use the machine with wrong
mains voltage or frequency.
•
NOTE: The condensation of the haze makes floors, stairs and other surfaces
slippery. Do NOT direct the machine’s haze output beam towards cool or hard
surfaces like wood, plastics, glass or metal. If the machine is frequently used, or used
for a long time, often check that no surface is slippery.
•
NEVER mix or dilute the fluid.
•
NEVER heat the fluid. Use room-temperature fluid only.
•
The machine is for indoor-use only. NEVER use in dusty environments. Keep away
from moisture!
•
Operate in room temperatures only. Min. operating temperature is +10
°
C, max.
temperature is +30
°
C.
•
NEVER cover vents or air inlets on the machine housing.
•
NEVER use dimmers for control of power to the machine. The output of the
machine or compressor capacity / speed is NOT able to regulate with mains voltage.
If mains voltage is regulated (”dimmed”), the compressor and other electric
components will be damaged.
•
Service internal parts ONLY if you have the know-how and experience to perform
the service correctly. If not, please contact a Swefog service centre or the
manufacturer. NOTE: Incorrect service works and/or the use of non-original spare
parts will void the warranty.
•
NEVER change parts or details inside, use original spare parts only!
•
Do not overfill the machine. NEVER switch power on if fluid level is above the
”max” symbol.
•
NOTE: If there is – for any reason – a fluid leakage or spillage, wipe off fluid
spillage. DO NOT use the machine until it is mended.
•
NOTE: The haze may cause residues on mirrors, lenses and similar components if
there is too much haze in the air. Equipment using fan ventilation may draw haze
through the lamp housing, which may cause residues. Always check carefully where
to direct the output of the machine, and keep equipment that uses fans away from
the haze.
!
CAUTION !
