English version
W W W . S W E E X . C O M
6
Security
Security can be set at 64 or 128-bit encryption. We advise you to use 128-bit encryption. The use of WEP (Wireless Encryption Protocol)
requires extra computing power, so performance will be a little lower than without WEP. However, in practice this will be barely noticeable.
N.B.!
Before the encryption codes are configured, the new encryption codes must be set in the router first. If the router already has encryption codes,
these codes can be filled in for the new wireless product.
Setting WEP encryption
Set the “Authentication Mode” to “Shared Key”. Then set "Key length" to 64 bit or 128 bit.
Under “Key Value #1”, fill in a number code for encryption protection. For 64 bit, you have to fill in 10 characters and for 128 bit, you have to
fill in 26 characters. Random numbers from 0 up to and including 9 and letters from A up to and including H can be used. Fill in at least one
field and no more than four fields. Click on "Apply" after you have filled in the codes.
LC100060_man_inside 30-03-2005 15:07 Pagina 6