English version
4
The program will immediately search for the Powerline devices, which are connected with the powerline adapter of your computer
via the power grid. The found devices will appear in the window under “Device Name”. Here you can see the password (Default
setting empty), the quality of the connection, the effective data speed (“Rate (Mbps)”) and the MAC address of the adapter.
When you want to use the security possibilities you have to enter the password of the adapter. This password (“PWR: xxxx-xxxx-
xxxx-xxxx”) is unique for every adapter and is located on the sticker underneath the adapter under the MAC address (“MAC: xx:xx:
xx:xx:xx:xx”). We advise you to write these details on a piece of paper before you start the installation, this way you can easily
find the details.
Select the device you want to configure and click “Enter Password”. The following screen appears:
Enter the password that is on the adapter. Pay attention that the MAC address of the adapter is the same as the MAC address in
the program, so that the right password is entered!
Security
It is not necessary to configure the security for the Sweex Powerline Ethernet Adapter 85 Mbps to work properly. If someone has
access to your plug sockets, that person (when you did not setup security) could access internet via that plug socket. This is not
practical and will hardly ever occur, because the Powerline is limited to your own house. Powerline does go over all groups within
your house.