Section 2
FITTING INSTRUCTIONS
How to fit the unit
Place template against the surface and mark
with a fine tipped pen.
A jigsaw can be used when the Sweepovac is
being fitted in a removable toe- kick.
A Sawsall can be used when fitting in a fixed
toekick or fixed end panel.
The Sweepovac can be fitted in any toe-kick
that is 4” (100mm) or greater.
Drill corner holes
19
21
22
Take the Sweepovac from the box and remove
the 4 hex head screws holding the face plate on.
Unclip the face plate by gently releasing from
the plastic clips holding it to the body. A small
flat head screwdriver used gently may assist
with this. Remove the faceplate.
17
18
20
7
IF YOUR KITCHEN CABINETRY HAS BEING SUPPLIED WITH
THE SWEEPOVAC OPENING ALREADY PRE CUT IN THE
TOE KICK, THEN PLEASE PROCEED TO THE NEXT PAGE.
G O T O
PA G E 8
Sweepovac_2017 manual.indd 7
14/11/2017 21:41
