CONSOLE SATURN WP
Version 2.6
3403.504.02
Page 23
6.1.10 End of period
When the period finished, the following display appears:
Move switch in off position !
Turn the switch on to Stop.
If necessary, adjust score or other events that could have occurred.
Press the key
to go to the next period.
If some counters need to be reset to zero, choose:
[Reset Team Fouls only]
Sets the amount of team fouls back to 0.
[Reset Fouls & Time Out]
Sets the amount of team fouls and amount of Time Outs
used back to 0.
[Reset Time Out only]
Sets the amount of Time Outs used back to 0 for each team.
[No reset]
Nothing is reset to 0.
You can then choose the following data:
NP = No Pause
, by pressing this key, there will be no pause time displayed on the board, the next game
period will be displayed automatically.
P1, P2, P3
, by pressing one of these keys, the pre-programmed pause time will be displayed on the
board. When the pause time is over, it automatically goes onto the next game time. By pressing the ESC
key, the pause time is stopped and the change on the next game time is done automatically.
6.1.11 Pause
When the game is stopped and at any time, it is possible to introduce a count down (or pause or time out)
of a certain duration. This is very useful, for example, to indicate the beginning of the match or the
remaining warm-up time.
Press the key
then
[Pause].
Select the duration of the pause using
[Minutes] and
[Seconds].
Validate the duration of the pause by pressing the key
. The duration of the pause is now
displayed on the screen and on the board.
At the end of the pause the display and the board show the game time again.
Press
to cancel a pause in progress.
