background image

5

6

Limited Warranty - Terms & Conditions

Swann Communications warrants this product 
against defects in workmanship and material for 
a period of one (1) year from its original purchase 
date. You must present your receipt as proof of 
purchase for warranty validation. Any unit which 
proves defective during the stated period will 
be repaired without charge for parts or labour 
or replaced at the sole discretion of Swann. The 
end user is responsible for all freight charges in-
curred to send the product to Swann’s repair cen-
tres. The end user is responsible for all shipping 
costs incurred when shipping from and to any 
country other than the country of origin. 
The warranty does not cover any incidental, ac-
cidental or consequential damages arising from 
the use of or the inability to use this product. Any 
costs associated with the fitting or removal of this 
product by a tradesman or other person or any 

other costs associated with its use are the re-
sponsibility of the end user. This warranty applies 
to the original purchaser of the product only and 
is not transferable to any third party. Unauthor-
ized end user or third party modifications to any 
component will render all warranties void. By law 
some countries do not allow limitations on certain 
exclusions in this warranty. Where applicable by 
local laws, regulations and legal rights will take 
precedence.

For Australia:

 Our goods come with guarantees 

which cannot be excluded under Australian Con-
sumer Law. You are entitled to a replacement 
or refund for a major failure and for compensa-
tion for any other reasonably foreseeable loss or 
damage. You are also entitled to have the goods 
repaired or replaced if the goods fail to be of ac-
ceptable quality.

M1080FLB120416CAM16E | © Swann 2016

FCC Verification

This equipment has been tested and found to comply with the limits for Class B digital device, pursu-
ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• 

Reorient or relocate the receiving antenna

• 

Increase the separation between the equipment and the receiver

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected

• 

Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) These devices may not cause harmful interference.
(2) These devices must accept any interference received, including interference that may cause unde-
sired operation.

HD Bullet

Security Camera

1080p HD Bullet Camera

EN

INSTRUCTION MANUAL

Helpdesk/Technical Support

Technical Support E-mail: 

  

[email protected]

Telephone Helpdesk

USA Toll Free 

 

  1-800-627-2799

USA Parts & Warranty 

 1-800-627-2799

    (M-F, 

9am-5pm 

US 

PT)

AUSTRALIA

 

 

 

1800 788 210 

NEW ZEALAND Toll Free

  

 

0800 479 266 

UK 

 

   0808 

168 

9031

Security Made Smarter

Summary of Contents for SWPRO-1080FLB
















Reviews: