6
Installation Notes
1. Remove the two screws to the rear of the refrigerator, then the three screws
from the front underside.
If the refrigerator is to be installed in an under counter position, the top cover will
most likely need to be removed. Proceed as follows:
Under Counter Installation
4. Ensure the supply voltage of scoket is same as rating label.
5. The plug must be properly inserted to the wall socket.
6.
The mains supply socked must be earthed - preferably with a switch. If it is not
earthed, do NOT install this appliance there. Do not use an extension cord
7. The product is equipped with adjustable feet. Once the product is in place, adjust
these to ensure the fridge is level and doesn’t rock.
DO NOT SITE THE PRODUCT WHERE THE AMBIENT TEMPERATURE IS LIKELY TO
DROP BELOW 5 DEGREES CENTIGRADE - EG: GARAGE OR SHED
SR11035_IM.indd 6
07/11/2017 11:39
