1
Wireless
Doorbell Kit
Instruction Manual
Model: DC810B
Page 1: ...1 Wireless Doorbell Kit Instruction Manual Model DC810B ...
Page 2: ...ip the back cover back onto the Doorbell unit making sure the rubber seal is fitted properly to ensure the unit remains water resistant Replacement of the battery is necessary as soon as the LED indicator stops flashing when the Doorbell button is pressed To replace the battery insert a small flat head screwdriver into the small notch at the base and lift the back cover off Replace with a battery ...
Page 3: ...nit You can then shift the unit downwards to ensure it sits on the screws firmly Operating Guide WARNING When fitting the screws into the wall make sure you are not inserting them anywhere near electrical wires including wires that may be behind the wall If you are unsure at all please get a professional to check first and install the screws for you PAIRING THE DOORBELL WITH THE SPEAKER 1 Press an...
Page 4: ...stralian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to major failure Battery Safety Information Replace batteries at the same time Do not mix new and old ...
