A-96.250.231 / 130421
AMI Turbitrack
Installation
18
3.3.2
FEP Tube at Sample Outlet
Connect the 1/2” tube [F] to the hose nozzle [E] and place it into a
pressure free drain with sufficient capacity.
3.3.3
Exchange capillary
The AMI Turbitrack is as standard delivered with the capillary FEP
tube with an inner diameter of 1 mm and a length of 500 mm.
If you have a low sample pressure or you need a high sample flow, a
shorter capillary with 186 mm length can be used.
To replace the capillary proceed as follows:
1
Pull out the knob of the pressure regulator valve [A]
2
Close the valve.
A
B
C
D
E
F
Tube from cleaning outlet
Deaeration tube
Sample outlet
Drain funnel
Hose nozzle
1/2” tube
C
F
A
B
D
E
A
B
Pressure regulator valve
Tube fitting
C
D
500 mm capillary
186 mm capillary
A
B
C
D
