AMI Powercon
Product Description
A-96.250.341 / 061015
9
Signal
Outputs
Two signal outputs programmable for measured values (freely scal-
able, linear, bilinear, log) or as continuous control output (control
parameters programmable).
Current loop:
0/4–20 mA
Maximal burden:
510
Third signal output with the same specifications as option.
(Only possible if no communication interface is used.)
Relays
Two potential-free contacts programmable as limit switches for
measuring values, controllers or timer for system cleaning with au-
tomatic hold function. Both contacts can be used as normally open
or normally closed.
Maximum load: 1 A/250 VAC
Alarm Relay
One potential free contact.
Alternatively:
Open during normal operation, closed on error and loss of
power.
Closed during normal operation, open on error and loss of
power.
Summary alarm indication for programmable alarm values and in-
strument faults.
Input
One input for potential-free contact to freeze the measuring value
or to interrupt control in automated installations. Programmable as
HOLD or OFF function
.
Communica-
tion interface
(optional)
RS232 Interface for logger download with SWANTerminal
USB Interface for logger download
RS485 with Fieldbus protocol Modbus or Profibus DP or
Webserver connection via Modbus.
Safety
Features
No data loss after power failure. All data is saved in non-volatile
memory.
Over voltage protection of in- and outputs.
Galvanic separation of measuring inputs and signal outputs.
The analyzer is factory tested and ready for installation and opera-
tion.
