A-96.250.491 / 190121
AMI Deltacon DG
Program List and Explanations
58
2.4 I/O State
Shows current status of all in- and outputs.
2.4.1
2.5 Interface
Only available if optional interface is installed.
Review programmed communication settings.
3 Maintenance
3.1 Simulation
To simulate a value or a relay state, select the
alarm relay,
relay 1/2
signal output 1/2
with the [
] or [
] key.
Press the [Enter] key.
Change the value or state of the selected item with the [
] or
[
] key.
Press the [Enter] key.
The value is simulated by the relay/signal output.
At the absence of any key activities, the instrument will switch back
to normal mode after 20 min. If you quit the menu, all simulated val
-
ues will be reset.
3.2 Set Time
Adjust date and time.
Alarm Relay:
Active or inactive
Relay 1/2:
Active or inactive
Input:
Open or closed
Signal Output 1/2:
Actual current in mA
Signal Output 3:
Actual current in mA (if option is installed)
Alarm Relay:
Active or inactive
Relay 1/2:
Active or inactive
Signal Output 1/2:
Actual current in mA
Signal Output 3:
Actual current in mA (if option is installed)
