80
A-96.250.581 / 220616
AMI Codes-II CC
Program List and Explanations
9.
Program List and Explanations
1 Messages
1.1 Reagent Status
1.1.1
DPD/Buffer
: Shows the fill level of the DPD/Buffer.
Potassium Iodide
: Shows the fill level of the Potassium Iodide.
Cleaning solution
: Shows the fill level of the Cleaning solution.
A
behind the reagent means that the filling level is ok. If the fill-
ing level falls below 17%, it is shown in %.
1.2 Pending Errors
1.2.5
Provides the list of active errors with their status (active, acknowl-
edged). If an active error is acknowledged, the alarm relay is active
again. Cleared errors are moved to the Message list.
1.3 Maintenance List
1.3.5
Demands necessary maintenance, e.g. preparing new reagents.
1.4 Message List
1.4.1
Shows the error history: Error code, date / time of issue and status
(active, acknowledged, cleared). 65 errors are memorized. Then
the oldest error is cleared to save the newest error (circular buffer).
2 Diagnostics
In diagnostics mode, the values can only be viewed, not modified.
2.1 Identification
Designation
:
View the Designation of instrument.
Version
: Firmware of instrument (e.g. V6.00-02/16)
2.1.3
Peripherals
: PeriClip 1: Firmware of peristaltic pump (e.g. 1.06)
2.1.4
Factory Test
: Test date of the Instrument, Motherboard and Fron-
tend. QC factory test.
2.1.5
Operating Time
: Years/Days/Hours/Minutes/Seconds
