31
Alarm: Detection
Channel:
Select a camera that you would like to edit.
Normal:
Your DVR will constantly record for a set period of time.
Detection:
Your DVR will only record when motion has been detected from
one or more cameras.
Each square represents 30 minutes. Using the mouse, select the desired re-
cording mode then click on a particular square to change or click and drag
the mouse over the squares corresponding to your desired time period. The
same action can also be applied if Normal or Detection recording is not re-
quired (on one or more sections that have recording enabled).
By default, a 24-hour 7 days a week Detection
schedule has been enabled for each camera
connected. The schedule can be changed to
suit your needs and each camera can have a
different schedule if needed. The schedule is
color coded to represent the event type.
→
Use the “Copy” function to apply all set-
tings to the other cameras connected.
→
Click “Default” to revert to default settings.
→
Click “Apply” to save settings.
