A-96.250.671 / 070222
AMI Silica
Product Description
16
2.1. Instrument Specification
Note:
No oil, no grease, no sand.
Power supply
AC variant:
DC variant
Power consumption:
100–240 VAC (± 10%)
50/60 Hz (± 5%)
10–36 VDC
max. 35 VA
Transmitter
specifications
Housing:
Ambient temperature:
Storage and transport:
Humidity:
Display:
aluminum, with a protection degree of
IP 66 / NEMA 4X
−10 to +50 °C
−30 to +85 °C
10–90% rel., non condensing
backlit LCD, 75 x 45 mm
Sample
requirements
Flow rate:
Sample pressure inlet:
Temperature:
min. 10 l/h
0.15–2 bar (2–28 PSI)
up to 50 °C (122 °F)
Silica
measurement
Measuring method:
Measuring range:
Reproducibility:
Max. PO
4
concentration:
colorimetric, molybdosilicate method
1 to 5’000 ppb
±1 ppb or ±5% whichever is greater
<10 ppm
On-site
The analyzer site must permit connections to:
requirements
Sample inlet:
1 Drain:
Tube 4 x 6 mm
Tube 15 x 20 mm
(1/2”) hose nozzle which must end in
pressure free waste of sufficient capacity.