background image

6.2  STORAGE

• 

Before storing the zipboard, fully charge it to prevent battery over-discharge due to non-use.

• 

If storing the zipboard for more than one month, discharge and recharge the battery every three months.

• 

Cover the zipboard to protect it from dust. Do not store in a dusty environment as, with all electronic devices, this may 

cause damage over time.

• 

DO NOT store the zipboard in an unheated garage, shed, or other location with extreme temperature fluctuations or 

ranges. Store only in environments where temperatures will be stable.

6.3  TRANSPORTATION 

CAUTION

Department of Transportation (DOT) requirements affecting the packaging and transportation of all batteries 
containing acid or alkali are contained in the Code of Federal Regulations - 49 CFR Section 173.159.

Shuttle Zipboard Swagboard batteries are UN2800, Batteries, Wet, Non-spillable. The batteries have been tested and meet the 
non-spillable criteria listed in 49CFR§173.159. Non-spillable batteries are accepted in CFR 49, Subchapter C requirements under 
the following conditions:

1. The batteries must be protected against short circuits and securely packaged.

2. The batteries and their outer packaging must be plainly and durably marked “NON-SPILLABLE” or “NONSPILLABLE 

BATTERY.”

Summary of Contents for ZIPBOARD































Reviews:

Related manuals for ZIPBOARD