300 - 1880 Government St. • Penticton, B.C. Canada V2A 7J1 • Phone (250) 490-8883 • Fax (250) 490-8885 • www.swagman.net
REV 23/10/19
MOUNTING INSTRUCTIONS
• Locate the wall studs behind the drywall (diagram 1). They are usually 16” apart. A stud finder can be used to find the studs.
The rack must be mounted into the wall stud, as the drywall may not be strong enough to hold the weight of a bike.
• Position the main assembly (A) so that it is vertically level as shown in diagram 2. Ensure that the rack is mounted in a position
that allows for easy access of the rack. Also ensure the bike will be off the ground and fits the space on either side of the rack.
• Mark the location of the 2 holes on the wall mount, and drill 1/8” guide holes (diagram 2).
• Attach the rack using 2 supplied screws and wall plugs (if necessary), diagram 3.
• Attach horizontal bike support (B) to the main assembly using the threaded knob (C), diagram 4.
• Rack arm folds up when not in use (diagram 5).
3
5
1
4
2
A
B
C
INSTRUCTION SHEET
PRODUCT: 80956 Fold It Deluxe
• Page 1 of 1
ATTN: STATE OF CALIFORNIA CONSUMERS
WARNING:
Cancer and Reproductive Harm • www.P65Warnings.ca.gov
