Swagelok TF16, Manual, Page: 9 / 24

Tube Facing Tool User’s Manual 9
Accessories
TF Series Cutting Insert
The cutting insert is supplied and can be used with all TF series
tool holders.
Cutting Tool Holder for Beveling and Squaring
An adjustable tool holder is included with a Torx screw for use
with tubing within the standard application range. Additional
tool holders for use with additional sizes of tubing and with
different bevel angles are available. Refer to the Application
Range table on page 10 for size definitions.
Stainless Steel Collet Set
These are used for deformation-free clamping of tubing. They
ensure precise mounting of tubing or Micro-Fit
® fittings and
a quick change of collet sets without tools. For use on all
tubing materials with an OD from 0.125 to 3.000 in. or 3 mm to
76.2 mm.
Refer to Tube Facing Tools catalog, MS-02-426 , for additional
information.
Fig. 9 Cutting Insert
Fig. 11 Stainless Steel Collet Set
Fig. 10 Tool Holder