k
i
5 YEAR
MOTOR WARRANTY
PREMIUM SENSORS POWERED BY SW SUN CONTROL
WIND CLIMATE SENSOR
WIND CLIMATE SENSOR
ATTENTION:
before installing and using the sensor
please read the instructions carefully. Before the
installation check the compatibility of the device
with the associated motors and controls.
SAFETY INSTRUCTIONS
• Risk of injury through an electric shock.
• Terminal connections to network must be made
by an authorised electrician.
• Disconnect all connecting cables throughout
the system before carrying out installation or
maintenance.
• Ensure that the device cannot be accidentally
switched on.
• Keep persons away from the systems operating
range.
• An automatically controlled sun protection
system can move unexpectedly. Therefore,
never place objects in the travel range.
• Keep children away from controls.
• Always observe country-specific regulations.
• If the system is controlled by one or more
devices, the system operating range must be
visible during operation.
• Always adhere to relevant building regulations.
• Automatic and manual movement when frozen
(e.g. frozen wind wheel) and during storms can
seriously damage the system.
• The receivers (e.g. radio control) no longer
function correctly after a power failure. In this
case, an extended sun protection system cannot
be retracted, e.g., during a storm.
Wireless climatic sensor 434.15MHz which controls radio motor/s for awnings according to weather
conditions under stated thresholds.
IMPORTANT:
this sensor does not protect the awnings against strong gusts of wind. When weather
conditions presents this sort of risk, ensure that the awning remains closed.
INSTALLATION
Note:
ensure that sensors are not installed close to metal surfaces, panes of metalised glass or
generally magnetic fields can reduce the radio signals range.
Radio devices working on the same frequency could interfere with signals reception.
Select the right place for the installation of the sensor. Be careful that trees, roofs or parts of the
building do not affect the light intensity and wind measurement.
The adjustable base of the sensor allows the right installation (
horizontal position
) on any surface
INSTALLATION
TECHNICAL DATA
Frequency (MHz)
434.15
Power Supply
120V - 60Hz
Wind Sensor (5 levels)
6 / 12 / 18 / 25 / 31 mph
Sun Sensor (4 levels)
5 / 20 / 40 / 60 Klux
Protection Rate
IP54
Coverage (int/ext)
65 ft
Working Temp (°F)
23° to 104°
Dimensions (in)
10.62 x 4.72 x 3.54
Weight (lbs)
0.14
WIRING CONNECTION
1. Open the top cover by the 4 screws
on the bottom.
2. Connect the power line as described
below.
Check that the power supply
corresponds to the label data.
3. Close the top cover and tight the
screw to seal it.
120V - 60Hz
Power Supply
Additional Accessories required:
2-wire cable that meets the standards of the country in which it is installed
