www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: [email protected]
BEDIEUNUNGSANLEITUNG
/ INSTRUCTION
MANUAL
40009L
(6)
Pull a sufficient length of cutting wire to the outside. Position the cutting wire around the vehicle
windowpane. Be careful that the cutting wire is on the adhesive sealant. If necessary affix the
wire with adhesive tape. If the gap between the vehicle windowpane and the car body is not
accessible, dismantle any mouldings or veneers.
(7)
The wire is then placed on the pulleys of the two suction pads (picture 5). Be careful that you
guide the wire correctly.
Picture 5
(8)
The second end of the nylon wire is then affixed to the wire cable device (pictures 6 and 7).
Picture 6
Picture 7
