SVP UDR-70, User Manual

Page: 94 / 182

85
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
Chapter 6: GPS
6.1 Transmitter`s GPS Data Output
As already explained, the Receiver outputs the Transmitter’s GPS data
through the AIRCRAFT GPS IN & OUT / SERIAL REMOTE connector (see
section ¡Error! No se encuentra el origen de la referencia. for connector
information). The protocol output is the same configured in the Aircraft GPS,
typically NMEA0183. To establish a communication between the Receiver and
the computer through the serial port, please follow these instructions:
5. Type a name for the connection and an icon from the list.
Figure 70: HyperTerminal new connection
6. Configure a COM port for the communication and select the COM port
configured.
Figure 71: COM port configuration