SVP UDR-70, User Manual

Page: 53 / 182

44
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
4.2.2.2.5 Decoder IP Output
To configure the different parameters related to this option, select the enable
option and press the OK button.
Figure 21: IP Output Options
Line nº Function
1
Local IP Config:
In this field, different parameters related to the configuration of
the local network can be set.
The available parameters are:
•
Local:
IP address of the device which is going to send the information.
To change the IP address first press the OK button and then,
with the Up, Down keys select the desired number. To change
from one character to another, press Right, Left keys. To save
the value, press the OK button. (editable parameters)
• Mask:
Subnet address of the device which is going to send the
information. To change the Subnet Mask address first press the
OK button and then, with the Up, Down keys select the desired
number. To change from one character to another, press Right,
Left keys. To save the value, press the OK button. (editable
parameters)
•
Gateway:
Gateway address of the device which is going to send the
information. To change the Gateway address first press the OK
button and then, with the Up, Down keys select the desired
number. To change from one character to another, press Right,
Left keys. To save the value, press the OK button. (editable
parameters)
•
Video over IP MAC:
In this field the MAC address of the Video over IP card is
displayed (reading parameter)