SVP UDR-70, User Manual

Page: 134 / 182

125
UDR-70 H.265 Portable Receiver
USER’S MANUAL V1.0
8.2.9 Remote control
The UDR-70 receiver can be controlled and monitored remotely over
an Ethernet link throughout a Web Server and SNMP.
The link is connected via an 8-pin RJ-45 connector with a 10/100
Base-T network interface. This connector is located on the rear panel
of the rack-mount demodulator.
Remote connection technical features
Item Features
Connector Label REMOTE
Connector type RJ-45
Table 38: Remote connection technical features
8.2.10 USB
Through the USB connection, it is possible to update the firmware of
the UDR-70 receiver directly from an exernal USB device receiver.
Also, it can be used to supply up to 2.5A @ +5V to a device.
The connector is type A and its pinout is:
USB connection technical features
Item Features
Connector Label USB
Connector type Type A
Maximum output current 2.5 A
Table 39: USB input connection technical features