BIOS Utilities
Advanced Menu 5 - 9
5
Reset Configuration Data: (Advanced Menu)
This item is set to
No
as default. You can change the setting to
Yes
if you have in-
stalled a new add-on which has reconfigured the system, resulting in such a serious
system conflict that the operating system is unable to boot.
Legacy USB Support: (Advanced Menu)
Use this menu item to enable/disable the support for Legacy Universal Serial Bus.
Boot-time Diagnostic Screen:
(Advanced Menu)
Use this menu item to enable/disable the Boot-time Diagnostic Screen (or POST
screen - see
“The Power-On Self Test (POST)” on page 5 - 2
).
Power On Boot Beep: (Advanced Menu)
Use this menu to enable/disable the single beep sound at the end of the POST. This
item is "
Disabled" by
default.
Battery Low Alarm Beep: (Advanced Menu)
Use this menu item to enable/disable the battery low alarm beep.
Total Graphics Memory: (Advanced Menu)
Press
Enter
here to select the amount of pre-allocated graphics memory. The default
setting is
128MB
, and this may be adjusted to either
64MB
or
224MB
.
Summary of Contents for M521N
