background image

1 - 16 Video Features

Quick Start Guide

1

Video Features

You can switch display devices, and configure display options, from the 

Display Settings

 control panel (in 

Per-

sonalization

) in 

Windows Vista

. For further information see 

“Video Driver Controls” on page B - 1

.

To access Display Properties in 

Windows Vista

:

1.

Click 

Start

, and click 

Control Panel

 (or point to 

Settings

 and click 

Control Panel

).

2.

Click 

Adjust screen resolution

 under the 

Appearance and Personalization

 menu (or double-click 

Personalization > Display Settings

).

3.

Move the slider to the preferred setting in 

Resolution:

 

 (

Figure 1 - 10

).

4.

Click the arrow, and scroll to the preferred setting In 

Colors:

 

(

Figure 1 - 10

).

5.

Click 

Advanced Settings

 (button) 

 (

Figure 1 - 10

) to bring up the 

Advanced Settings

 tabs.

OR

6.

Right-click the desktop and click 

Personalize

, and then click 

Display

 

Settings

 and adjust as above.

1

2

3

1

2

3

Figure 1 - 10

Display Settings

Summary of Contents for Iris M548SR











































































































































































































Reviews: