SVF BZ9 Series Installation Operation & Maintenance Download Page 1

www

.

SVF

.net

BZ9 Series Ball Valves

 

 

IOM-BZ9

UALITY 

FLOWS

THROUGH US

What do you need today?

 TM

GENERAL

SVF Ball valves have been designed and engineered 

to  provide  long  lasting  and  trouble  free  service 

when used in accordance with the instructions and 

specifications herein.

The following instructions refer only to SVF Series BZ9 

Ball Valves.

Keep  protective  cover  in  place  until  moment  of 

installation.  Valve  performance  depends  upon 

preventing of damage to ball surface. Upon removal 

of cover, make sure that the valve is completely open 

and free of obstruction. 

INSTALLATION

The  valve  may  be  installed  for  flow  or  vacuum  in 

either  direction.  Carefully  exclude  pipe  sealants 

from the valve cavity. When installing, use standard 

gaskets suitable for the specific service. Tighten end 

connection bolts evenly. 

STORAGE:

All  manual  valves  are  shipped  in  the  fully  open 

position with protective end caps (covers). Keep all 

protective packaging, flange covers, or end caps 

attached  to  the  valves  during  storage.  To  avoid 

damage to the seat due to contact with the balls 

edge, leave the valve in the 

fully open or closed 

position

 during storage. It is recommended to keep 

the valves in a clean and dry environment until ready 

for use.

!!!CAUTION!  Safety Precautions!!!

Before removing valve from pipeline NOTE that:

Media flowing through a valve may be corrosive, 

toxic,  flammable,  a  contaminant  or  harmful 

nature. Where there is evidence of harmful fluids 

having flowed through the valve, the utmost care 

must be taken. It is suggested that the following 

minimal  safety  precautions  be  taken  when 

handling valves.

1. Always wear eye shields.

2. Always wear gloves and overalls.

3. Wear protective footwear.

4. Wear protective headgear.

5. Ensure that running water is readily accessible.

6. Have a suitable fire extinguisher ready if media 

is flammable.

7. Be sure that you are aware of the fluid that has 

been passing through the valve before opening or 

dismantling any valve. Require MSDS information.

By checking line gauges ensure that no pressure 

is present at the valve.

Ensure that any media is released by operating 

valve slowly to half open position. Ideally, the valve 

should be decontaminated when the ball is in the 

half open position.

These valves, when installed, have body connectors 

which form an integral part of the pipeline and 

the valve cannot be removed from the pipeline 

without being dismantled.

Valves  and  accessories  must  not  be  used  as  a 

sole  support  of  piping  or  human  weight.  Safety 

accessories  such  as  safety  relief  (overpressure) 

valves are the responsibility of the system designer.

It is the user/system designer’s responsibility to use 

insulation in high temperature applications. Refer 

to OSHA documents for more details.

INSTALLATION, OPERATION & MAINTENANCE FOR SVF SERIES BZ9 BALL VALVES

Reviews: