ENG
2
DVB-T/T2 TV Tuner with
Multimedia Player
Caution! High voltage inside! To avoid the risk of electric
shock do not open or touch elements inside.
1. SAFETY PRECAUTIONS
•
Carefully read this Instruction Manual before installing and connecting TV Tuner and do not forget
about it during operation in future. Follow all instructions and pay attention to warning signs.
•
Disconnect the device from the electrical source of power, if you do not intend to use it for an
extended period. Switch o
ff
the power and unplug the power supply plug for safety purposes
during storm, as well as aerial wire. Do not touch the aerial wire plug.
•
Do not close vent openings with newspapers, serviettes and other objects not to prevent heat
removal. Do not install the device close to thermal sources such as radiators, heaters, etc. to avoid
its overheating.
•
Protect the device against ingress of foreign objects inside.
•
Protect the device against high humidity, ingress of water and dust inside.
•
Provide easy access to the socket and power cord. Before connecting the tuner to the power
supply network make sure that the socket and power cord are not damaged and they provide a
reliable contact. The power cord must not be deformed or bended. Do not place any objects on the
power cord and aerial cable. It is prohibited to plug the tuner in the network with voltage less than
90 V or higher 242 V and with alternating current frequency di
ff
erent from 50 / 60 Hz.
•
Protect the device against excessive vibrations or being dropped, which can result in damage of
its housing and electronic components and reducing its service life. Keep out of reach of children
to avoid the device damage by them.
•
Never attempt any repairs of the appliance. Any repairs must be performed by specialists of
a service centre. See the list of service centres on the web-site
www.sven.
fi
.
Danger arrow inside triangle means hazardous voltage inside housing.
Exclamation mark inside triangle means that you should pay special attention to available
important instructions.
Square-in-square means that the device belong to Class 2 electrical protection. Product
safety is provided by double insulation of current-carrying parts. Identical components must
be used only for the replacement of components.
ATTENTION!
If the device was exposed to the electrostatic discharge, it can be out of operation
temporarily. In this case it is necessary to turn off the device and to turn on again after a
time.
