Svantek SVAN 979, User Manual

Page: 238 / 377

238
SVAN 979 User Manual - Appendixes
Word
number
Name Comment
3 LoggerRes
bit mask of results written to logger in vibration measurement mode:
1
– Peak
2
– P–P
4
– Max
8
– RMS
bit mask of results written to logger in sound measurement mode:
1
– Peak
2
– Max
4
– Min
8
– Leq
16
– LR1
32
– LR2
64
– LXY
… reserved
Table B.1.15. Real Time Filters parameters
Word
number
Name Comment
0 0nn21h
21h = block identifier
0nnh = block length in words
1 Type[1]
type of the first filter:
0
– highpass filter
1
– lowpass filter
2
– bandpass filter
2 Order[1]
order of the first filter
3..4 LowPole[1]
low pole of the first filter in 10mHz format (parameter not relevant to
low-pass filter)
5..6 HighPole[1]
high pole of the first filter in 10 mHz format (parameter not relevant
to the upper-pass filter)
...
second filter parameters
...
third filter parameters
… reserved
Table B.1.16. Marker parameters
Word
number
Name Comment
0 0043h
43h = block identifier
1 BlockLength
block length in words
2 MarkerCount
number of markers
3..7 MarkerName[1]
name of the first marker (10 ASCII symbols)
8
reserved
9 MarkerType[1]
type of the first marker:
0
– block marker
1
– point marker
...
parameters of further markers
… reserved