Svantek SVAN 971 User Manual Download Page 53

Page: 53 / 220

SVAN 971 User Manual

8 CONFIGURING INSTRUMENT PARAMETERS

– Instrument

The

Instrument

section is related mostly with configuring

of hardware components of the instrument.

<ENT>

The

Instrument

section contains following items:

User Inter.

allowing to choose the user interface option;

Battery

allowing to display information about current power source;

Keyboard

allowing to program some keyboard functions;

Power Off

allowing to switch off the instrument power in luck of activity;

USB

allowing to configure the USB interface. This position is available only in the

Advanced

user interface mode;

RS232

allowing to configure the RS232 interface;

Self Vibr.

allowing to set the threshold for marker registration of instrument self-vibration.
This position is available only in the

Advanced

user interface mode;

RTC

allowing to set the Real Time Clock;

Unit Label

allowing to

display instrument properties.

8.1 C

HOOSING THE USER INTERFACE MODE

–

SER

NTERFACE

There are three modes of the user interface:

Start/Stop

Simple

Advanced

. These modes can be selected in

the

User Inter.

window. The

Simple

mode defines basic

instrument settings, while the

Advanced

mode defines

full scope of settings. Many windows thus have different
views in different interface modes.

<ENT>

The

Start/Stop

mode limits the user interface to only one

User

Interface

position in the main

Menu

and

measurement windows.

<Menu>

Note: When you switch the interface mode from more complex to
simplest there

always appear the request “Do you restore the default

value of the advanced settings?” If the answer is “No”, then all settings
that were made in positions not active in simplest mode will stay
unchanged. If answer is “Yes”, then these positions will be changed to
default settings.

Summary of Contents for SVAN 971




























































































































































































































Search results

Summary of Contents for SVAN 971

Reviews:

Brands by name

Popular brands

Svantek SVAN 971, User Manual

Search results

Summary of Contents for SVAN 971

Reviews:

Brands by name

Popular brands