Svantek SV 104BIS, User Manual

Page: 66 / 180

66
SV 104BIS User Manual
Figure 6-19 Keyboard security settings panel
To turn on the security option: switch on
“Lock During Measurement”
. SV 104BIS will disable the keyboard
every time, the measurement run is started.
See Chapter 4.12 how to lock and unlock the SV 104BIS instrument.
If
“Unlock on Key”
is set to On , SV 104BIS will require special code to be input by pressing four keys defined
in this panel in a particular sequence
If
“Unlock on Key”
is set to Off , SV 104BIS can be locked/unlocked without providing Lock/Unlock sequence.
Simply hold the key for a couple of seconds during which a countdown (
“Keyboard lock/unlock” 3…
2… 1…
) is displayed and the unit gives you time to decide if you really want to activate/deactivate the security
lock. If you release the key too early, the operation will be cancelled.
6.3.9.4 Auxiliary settings
Under auxiliary settings panel it is possible to:
•
Enable additional warning screens to be displayed under certain conditions:
o
“Logging disabled”
it warns the operator that time history results will not be stored
o
“Power off”
additional confirmation just before switching off.
•
“Comment file name”
defines the name of the Voice note comment file. “
Comment Text”
is also
able to be entered here if required.
•
“Vibration Marker”
is used on the basis of acceleration threshold setting (
Off, 1g,…15g
) the lower
the threshold level selected then the more sensitive the dosimeter will be to possible bumps and
shocks during use.
•
“Language”
enables the user to change the menu language displayed on the screen of the
dosimeter. The default language is English.
•
“Time
To Automatic
Shutdown”
enables the user to change time period after which the unit will be
shut down if no key will be pressed.
• “Bluetooth”
enables the user to switch on or off the Bluetooth
®
connection.
•
“
Bluetooth PIN
”
code configuration is required to establish connection .
Note: For Air-transport Bluetooth
®
interface should be turned off . Make sure that correct settings
file is applied .