Svantek SV 104BIS, User Manual

Page: 31 / 180

31 SV 104BIS User Manual
3.10.6 INSTRUMENT STATUS view mode and Bluetooth security PIN code
The Instrument Status view presents:
•
the battery charge status ( Bat.Charge ) along with estimated working time which is left until the
battery is expected to be completely drained ( Bat.Left )
•
current configuration information ( Setup ),
•
Bluetooth status ( On or Off ) and PIN code,
•
Timer status ( On or Off ) and time left to start.
The Instrument Status screen is moved down and up with the and keys respectively.
Figure 3-18 INSTRUMENT STATUS view mode screens
The Bluetooth security PIN
enables the user to protect the instrument’s access via Bluetooth
®
by Assistant
mobile application. PIN is defined in the Supervisor software (Chapter 6.5.7.4 ).
When Timer is On there are additional positions in the Status list with time left to start.
Figure 3-19 Timer information
3.11 ALARM
SCREEN REVIEW
Apart from simple LED alarm indications (Chapter 3.6 ) there are a few alarm conditions when ALARM
presentation screens will appear. During a measurement run SV 104BIS will immediately turn on the display
at the time that the programmable alarm condition is exceeded. The detailed alarm state condition for each
profile is presented to the user. Press any key, to confirm the information.
name of the
currently
setup loaded
Bluetoth status
and PIN
Battery status
- time left
profile names
Timer status