SV 104 USER'S MANUAL_
DRAFT
_______________________________________________
_
24
3.9.2
Primary
“ONE-RESULT” parameters view mode
The one result mode is always available in all measurement modes, and cannot be disabled. In one
result mode any measurement result, selected via
<SCROLL>
, may be presented. The user may
change the actual profile view by pressing
<PROFILE>
key. This view mode is useful if in low vision
conditions or is suitable for operators with some visual impairment.
Figure 3-11
Primary parameters view mode screen
3.9.3
RESULTS LIST view mode
To get information about a number of results at one time it is
handy to switch to the “results list” view
mode. Up to three parameters at a time are accessible for the operator.
Figure 3-12
Results list view mode screens
acronym for:
weighting filter:
A,C,Z
detector type
: Fast, Slow, Impulse
measured parameter name
acoustic profile number
profile preset name
parameter value
current criteria status bar:
TH
reshold,
E
xchange
R
ate,
CR
iterion level
measured parameters name
acoustic profile number
parameter values
configuration line
TH
reshold,
E
xchange
R
ate,
CR
iterion level
profile preset name
