Suzuki Wagon R Plus RB310, Service Manual

Page: 787 / 846

7C-12 CLUTCH (G10/M13 ENGINES)
9) Set release lever (1) to release shaft (2) aligning their punch
marks (3), then tighten nut.
Tightening torque
Clutch release lever nut (a): 23 N·m (2.3 kg-m, 16.5 lb-ft)
Tightening Torque Specification
Required Service Material
Fastening part
Tightening torque
N•m kg-m lb-ft
Flywheel bolt (M13 engine model) 70 7.0 50.5
Flywheel bolt (G10 engine model) 76 7.6 54.5
Clutch cover bolt 23 2.3 16.5
Clutch release lever nut 23 2.3 16.5
Pedal bracket bolt 13 1.3 9.5
Pedal bracket nut 13 1.3 9.5
Clutch cable clamp bolt 50 5.0 36.5
Lock nut 6.0 0.6 4.5
Clutch cable outer bolt 9.0 0.9 6.5
Pedal bracket screw 3 0.3 2.0
Pedal shaft bracket nut 6 0.6 4.5
Clump bolt 23 2.3 16.5
Material
Recommended SUZUKI product
(Part Number)
Use
Lithium grease SUZUKI SUPER GREASE A
(99000-25010) • Cable end hook and joint pin.
• Release shaft bushes and seal.
• Release shaft.
• Release bearing inside.
• Pedal spring.
SUZUKI SUPER GREASE I
(99000-25210) Input shaft spline and front end.