Suzuki VLR1800, Service Manual

Page: 473 / 624

Drive Chain / Drive Train / Drive Shaft: 3A-15
3) Remove the snap ring (3) with the special tool.
Special tool
: 09900–06108 (Snap ring pliers)
4) Remove the propeller shaft (4) and spring (5).
5) Unlock the final drive gear coupling nut with a chisel.
6) Remove the final drive gear coupling nut with the
special tools.
Special tool
(A): 09924–62430 (Long socket (22 mm))
Special tool
(B): 09924–64510 (Final driving gear
coupling holder)
7) Remove the washer (6) and final drive gear coupling
(7).
8) Remove the bearing stopper with the special tool.
Special tool
(C): 09924–62410 (Final drive gear bearing
holder wrench)
9) Remove the final drive gear (8) and shims (9).
10) Remove the bearing with the inner race from the
final drive bevel gear with the special tool.
Special tool
(D): 09913–60910 (Bearing remover)
NOTE
If no abnormal noise, the bearing removal is
not necessary.
3
I822H1310049-01
5
4
I822H1310050-01
(A)
(B)
I822H1310051-01
6
7
I822H1310052-01
(C)
I822H1310053-03
9
8
I822H1310054-02