Suzuki VLR1800, Service Manual

Page: 467 / 624

Drive Chain / Drive Train / Drive Shaft: 3A-9
Secondary Driven Gear Related Parts
Inspection
B822H13106011
Refer to “Secondary Driven Gear Disassembly and
Assembly (Page 3A-4)”.
Driven Bevel Gear
Inspect the driven bevel gear for wear or damage. If any
defects are found, replace the gear with a new one.
Output Cam Dog
Inspect the output cam dog for wear or damage. If any
defects are found, replace the out put cam dog with a
new one.
Driven Bevel Gear Shaft
Inspect the driven bevel gear shaft for wear or damage.
If any defects are found, replace the driven bevel gear
shaft with a new one.
Dumper Spring
Measure the free length of the damper spring. If the
length is shorter than the service limit, replace the spring
with a new one.
Dumper spring free length “a”
Limit: 64.6 mm (2.54 in)
Bearing
Inspect the secondary bevel gear bearings, left and right
for abnormal noise and smooth rotation.
Replace the bearing if there is anything unusual. Refer
to “Secondary Driven Gear Disassembly and Assembly
(Page 3A-4)”.
Oil Seal
Inspect the oil seal for wear or damage. If any defects
are found, replace the oil seal with a new one.
I822H1310030-01
I822H1310031-01
I822H1310032-01
“ a ”
I822H1310033-01
I822H1310034-02
I822H1310035-01