Suzuki VLR1800, Service Manual

Page: 305 / 624

Engine Mechanical: 1D-94
11) When installing the oil seal, apply grease to it.
CAUTION
!
Replace the oil seal with a new one.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
12) Install the bearings (6).
NOTE
The wider side “A” of the bearing should be
positioned driven gear side.
13) Install the balancer shaft assembly. Refer to “Engine
Bottom Side Assembly (Page 1D-68)”.
Balancer Shaft Parts Inspection
B822H11406057
Refer to “Balancer Driven Gear Disassembly and
Assembly (Page 1D-92)”.
Balancer Shaft Bearing
Inspect the balancer shaft bearings for abnormal noise
and smooth rotation. Replace the bearings if there is
anything unusual.
Balancer Driven Gear
Inspect the balancer driven pears teeth for wear and
damage. If any defects are found, replace it with new
ones.
Balancer Shaft
Inspect the balancer shaft for wear or damage. If any
defects are found, replace it with a new one.
I822H1140321-01
“A”
6
6
I822H1140322-01
I822H1140323-01
I822H1140324-01
I822H1140325-01