Suzuki VLR1800, Service Manual

Page: 247 / 624

Engine Mechanical: 1D-36
Rear Cam Chain Tension No. 2 Adjuster
• The rear cam chain tension No. 2 adjuster are
identified by the embossed letters (R-UP).
• Retract the push rod by pushing the stopper (1).
• Install a new gasket (2).
CAUTION
!
Use a new gasket to prevent oil leakage.
• Install the rear cam chain tension No. 2 adjuster (3)
and tighten its mounting bolts.
Tightening torque
Cam chain tension No. 2 adjuster bolt (a): 10 N·m
(1.0 kgf-m, 7.0 lb-ft)
• Install the spring (4).
• Install the gasket (5) and cam chain tension adjuster
cap bolt (6).
NOTE
Click sound is heard when the cam chain
tension adjuster cap bolt is installed.
• Tighten the cam chain tension adjuster cap bolt (6) to
the specified torque.
Tightening torque
Cam chain tension adjuster cap bolt (b): 23 N·m (
2.3 kgf-m, 16.5 lb-ft)
CAUTION
!
After installing the cam chain tension
adjuster, check to be sure that the adjuster
works properly by checking the slack of cam
chain.
1
R-UP
I822H1140090-01
2
3
4
(a)
I822H1140091-01
5
(b)
6
I822H1140092-01
G H
I822H1140341-01