Suzuki SMD12, Operator'S Manual

Page: 131 / 338

5. POINTS, EVENT MARKS
5-2
5.2 How to Enter a Point, Event Mark
5.2.1 How to enter a point (plotter and radar displays only)
Method 1: Directly on-screen
1. Tap the position on the screen where to put a point.
2. Tap [New Point] on the pop-up menu.
The default point symbol is put at the position selected. The
point is saved to the points list.
Method 2: Manual input (excluding Fish Finder display)
Open the slide-out menu, then tap [Lat/Lon]. The position shown is latitude/longitude
of the center of the displayed area. Edit the position as required. Tap [
 ] to register
the point and close the keyboard.
Method 3: Register point on the Points list
External equipment (fish finder, etc.) can output points to this equipment. TLL data
(NMEA 0183 format) from the external equipment is output to this equipment via an
NMEA data converter (IF-NMEA2K2, option). The latitude and longitude position of
the point is marked with the event icon.
1. On the home screen, tap [Lists]

[Points] to show the Points list.
2. Tap the [Add Point] button at top of the screen. The [Point Edition] screen shows
the latitude and longitude of the point to be registered and its location (on the pre-
view screen).
Lat
Lon
Range
Bearing
New Point
Goto
New Route
Tide
Chart Info
Cursor (light blue)
Latitude and
Longitude for
displayed screen’s
center.
Move cursor
Switch coordinate:
N↔S, E↔W
Position display format
Select position display format
from pull-down menu.