Suzuki RA410, Manual

Page: 92 / 761

STEERING ANGLE
When tie rod or tie rod end was replaced, check toe and then also
steering angle with turning radius gauge.
If steering angle is not correct, check if right and left tie rods are
equal in length “A”.
NOTE:
If tie rod lengths were changed to adjust steering angle, rein-
spect toe-in.
Steering angle inside : 44
5 +
3
5
outside : 37
5 +
3
5
Reference Information:
Side slip:
For inspecting front wheel side slip with side slip tester:
Side slip limit : Less than 3 mm/m
(Less than 0.118 in/3.3 ft)
If side slip exceeds above limit, toe-in or front wheel alignment may
not be correct.
FRONT END ALIGNMENT 3A-3