Suzuki Liana RH413, Service Manual

Page: 1227 / 1302

Security and Locks: 9F-14
Rearend Door Lock Assembly (for Wagon
Model) Removal and Installation
S3RH0A9606013
Removal
1) Remove door trim (1) from rearend door panel (2).
2) Disconnect door lock control rod (1) and door handle
rod (2).
3) Disconnect door lock motor lead wire (if equipped).
4) Loosen door latch bolts (3) and clip (4), and remove
door latch assembly (6).
5) Remove rearend door lock cylinder (5).
Installation
Reverse removal procedure to install rearend door lock
assembly noting the following instruction.
• Adjust door latch striker so that its center aligns with
the center of groove in door latch base.
Rearend Door Lock Assembly (for Wagon
Model) Inspection
S3RH0A9606014
• Check that door opens and closes smoothly and
properly.
• Check that door stops in the secondary latched
position properly (preventing door from opening
freely) and that door closes completely in the fully
latched position.
• Adjust door latch striker position, if necessary.
“A”
“A”
1
2
I2RH01960017-01
1
2
3
4
5
6
I2RH01960018-01
I2RH01960019-01