Suzuki Intruder VL800, Manual

Page: 107 / 142

7-46
License Plate Light
To replace the license plate light
bulb, follow the procedure below:
1. Turn the license plate lens
counterclockwise and remove
it.
2. Pull off the bulb from the
socket.
FUSES
If something electrical on your
motorcycle stops working, the first
thing you should check for is a
blown fuse. The electrical circuits
on the motorcycle are protected
from overload by fuses in the cir-
cuits.
If a blown fuse is found, then the
electrical problem must be
inspected and repaired before
replacing the blown fuse with a
new fuse. Consult your Suzuki
dealer for the electrical system
check and repair.

WARNING
Replacing a fuse with a fuse
that has an incorrect amperage
rating or substitute, e.g. alumi-
num foil or wire, may cause
serious damage to the electri-
cal system and possibly fire.
Always replace a blown fuse
with a fuse of the same amper-
age rating.
If the new fuse blows in a short
time, the electrical problem
may not be fixed. Have your
motorcycle inspected immedi-
ately by your Suzuki dealer.