Suzuki GRAND VITARA JB416, Service Manual

Page: 180 / 474

3C-63 Transfer: Motor-Shift Type (Transfer with Shift Actuator)
20) Remove input gear assembly (1) and counter gear
assembly (2) from front case (3) using plastic
hammer.
21) Remove front oil seal No.2 (1) from front case (2)
using flat end rod or the like, if necessary.
Reassembly
1) Install new front oil seal No.2 to front case (1) using
special tool, and then apply grease to oil seal lip.
: Grease 99000–25010 (SUZUKI Super Grease A)
Special tool
(A): 09913–85210
2) Install counter gear assembly (1) to front case (2),
and then install input gear assembly (3).
NOTE
Install input gear plate (4) so as not to hit
counter gear assembly.
3) Tighten new input gear plate bolts (1) to specified
torque.
Tightening torque
Input gear plate bolt (a): 23 N·m (2.3 kgf-m, 17.0
lb-ft)
3
1
3
1
2
I5JB0A331029-01
1
2
I5JB0A331030-01
(A)
1
I5JB0A331033-01
2
3
1
1
2
4
3
I5JB0A331034-02
1, (a)
I5JB0A331035-03