Suzuki FL125S, Service Manual

Page: 213 / 399

ELECTRICAL SYSTEM 6-13
Step 3
1) Measure the starter relay voltage at the starter relay couplers (between Y/G
+
and B/W
-
) when the
starter button is pushed.
Is the voltage OK?
Step 4
1) Check the starter relay. (
$
6-19)
Is the starter relay OK?
Starter motor runs but does not crank the engine.
Step 1
1) Check the starter clutch.
Is the starter clutch OK?
STARTER MOTOR REMOVAL (For FL125SD)
• Disconnect the battery
-
lead wire.
• Disconnect the starter motor lead wire
1
.
• Remove the starter motor
2
.
YES Go to Step 4.
NO
• Faulty starter button.
• Faulty ignition switch.
• Poor contact of couplers.
• Open circuit in wire harness.
YES Poor contact of the starter relay.
NO Faulty starter relay.
YES Faulty starter motor.
NO Faulty starter clutch.